Transformer 220Vac to 6-0-6Vac (1A)

Description

Transformer 220Vac to 6-0-6Vac (1A) is a high-quality electronic component designed for Arduino, prototyping, and educational electronics. 6-0-6 1A Center Tapped Step Down Transformer is a general-purpose chassis mounting mains transformer. The transformer has 230V primary winding and center-tapped secondary winding. The transformer has flying-colored insulated connecting leads ( Approx 20 cm long ). The Transformer acts as a step-down transformer reducing AC – 230V to AC – 6V.

The Transformer gives outputs of 6V, 6V, and 0V. The Transformer’s construction is written below with details of Solid Core and Winding.

The transformer is a static electrical device that transfers energy by inductive coupling between its winding circuits. A varying current in the primary winding creates a varying magnetic flux in the transformer’s core and thus a varying magnetic flux through the secondary winding. This varying magnetic flux induces a varying electromotive force (E.M.F) or voltage in the secondary winding. The transformer has cores made of high-permeability silicon steel. The steel has a permeability many times that of free space and the core thus serves to greatly reduce the magnetizing current and confine the flux to a path that closely couples the winding.

Transformer Terminal Description

No:
Terminal Name
Description

1
I1 and I2
These are the input wires for the transformer, which is connected to the phase and neutral of AC mains

2
T1 and T3
There are the output terminals of the Transformer, the voltage across it will be 12V AC

3
T2
This is the center-tapped wire of the transformer; this wire can be combined with either T1 or T3 to get 6V AC across it. It’s very useful for rectifier circuits

Specifications of 6-0-6 1A Center Tapped Transformer:-

Input Voltage:          230V AC
Output Voltage:         6V, 6V or 0V
You get 12V by using the two blue wires.
Output Current:         1A
Mounting:                 Vertical mount type
Dimensions are:
Width 50mm without mounting tabs.  75mm with the tabs.
Height 42mm
Depth 40mm

Features of 6-0-6 1A Center Tapped Transformer:-

Soft Iron Core.
1A Current Drain.

Applications of 6-0-6 1A Center Tapped Transformer:-

DIY projects Requiring In-Application High current drain.
On chassis AC/AC converter.
Designing a battery Charger.

Note
This is an AC transformer and the output is AC also.
If you need DC you need a power supply, not a transformer. It’s perfect for DIY makers, students, and anyone building custom electronic circuits or STEM kits.