Description
TOPLIA EH110-100 Soldering Iron 100W
The TOPLIA EH110-100 soldering iron presents itself as a serious workhorse tool. Its barrel is relatively slim yet robust, tapering toward the tip, covered in a heat-resistant sleeve or jacket that provides grip and safety. The heating element lives within the body, and the tool feels balanced in hand neither overly front-heavy nor dull in the rear. When gripping, you sense the promise of power contained within, a tool built for continuous soldering tasks rather than occasional tinkering.
Once powered on, the iron begins to warm steadily. Over seconds it approaches its working heat, the metal tip glowing faintly or radiating warmth as the internal element reaches equilibrium. During soldering, the tip transfers heat to joints reliably, and the tool instills confidence that it will maintain that heat under load. The construction feels durable: solid joints, firmly anchored parts, minimal flex. The tip is small relative to the body, apt for precision soldering yet backed by a potent 100 W source.
Over prolonged use, the EH110-100 remains composed. The tip holds its shape, the grip resists slippage, and the elements inside resist drift. There’s no overt drama a little oxidation perhaps on the tip, faint smells of flux during use but the tool remains stable, consistent, and serviceable. In a workshop, it sits as a dependable partner: always ready, always able, quietly doing its job while attention turns to the workpiece.
Features:
- The handle is made of nylon, which has high strength and good heat resistance.
- high-quality purple copper soldering iron head, high temperature resistance and corrosion resistance. Wear-resistance
- Thickened natural mica heating core, fast heating
- stainless steel sleeve, rust-free, fast heat dissipation.
- silicone sheath, heat-insulating and anti-slip, comfortable to hold.
- small size, light to the touch, suitable for long-term work.
- the power cord adopts a national standard three-core plug and a silicone wire, which is resistance to high temperature, aging, soft and elastic.
- External-heat (or “external heating”) design.
- Slim, ergonomic grip housing.
- Fast heat up capability.
- Heat insulation on the handle for safety.
- Suitable for continuous soldering use.
- Interchangeable tip compatibility.
Specifications:
| Specification | Value |
|---|---|
| Power (rated): | 100 W |
| Input voltage: | 220 V–240 V |
| Model: | EH110-100 (part of EH110 60/80/100 series) |
| Type: | External heat / electric soldering iron |
| Highest working temperature: | 480 °C |
| Temperature adjustment range: | Not adjustable |
| Warm-up time: | 10 s |
| Soldering iron head specifications: | Pointed head Ø7.6 × 82 mm |
| Soldering iron head material: | Red copper |
| Heating core: | Natural mica heating core |
Applications:
- Electronic circuit soldering.
- PCB assembly / repair.
- Electrical components joining.
- Wiring and cable soldering.
- Hobbyist / DIY electronics work.
Notes
- Before use, you should check whether the voltage is consistent with the nominal voltage of the soldering iron.
- When used for the first time, it may smoke slightly due to the heating of the electric heating element, which is a normal phenomenon and will disappear naturally after a few minutes.
- Before welding for the first time, hang a layer of tin on the soldering iron head as a protective layer. In the future, every time you use it, you should tin it first, and then tin it again when you use it. This operation is conducive to prolonging the life of the soldering iron.
- The soldering iron should be kept dry and strictly forbidden to use it in a humid environment.
- If it is not used for a long time, the power supply should be cut off to prevent dry burning.
When there is a black oxide layer on the head of the soldering iron that is not easy to tin, use a cleaning sponge to remove the black oxide first and tin it immediately. Do not use sandpaper or file to clean the soldering iron head, so as not to damage the protective layer of the soldering iron head. - Regularly carry out routine performance and safety performance checks, and the unqualified parts should be replaced in time, and even the soldering iron should be scrapped.
Waring:
- It is strictly forbidden to knock on the object to prevent damage to the soldering iron, thus causing safety hazards.
- Unplug the power plug or cut off the main power supply in time if it is disabled for a long time.
- If you need to replace the components, the power supply should be cut off and replaced by professional maintenance personnel.
Package Contents:
- 1x TOPLIA EH110-100 Soldering Iron 100W
Reviews
There are no reviews yet.