GOLDTOOL GSR-315 Anti-Static Desolder Pump | Teflon Tip, Metal Barrel

Description

GOLDTOOL GSR-315 Anti-Static Desolder Pump

The GOLDTOOL GSR-315 is an anti-static desolder pump built for one-hand operation with a strong spring and high suction to clear molten solder from circuit boards. The metal barrel has a serviceable Teflon® tip and a top plunger with a side release button for quick, repeatable action. The insert shows a clear three-step workflow and on-tool care so you can keep performance consistent during rework sessions.

Highlights — Why you’ll like it

• ✅ Anti-static hand pump for through-hole and pad cleanup.

• ⚙️ Strong spring / power suction noted on the insert for fast solder removal.

• 🖐️ One-hand operation: cock with the set knob, aim, and press the release.

• 🔩 Metal barrel with threaded nozzle and Teflon tip (replaceable).

• 🧼 Easy maintenance: cylinder opens for piston cleaning and light oiling.

• 🎯 Compact form with side trigger and top plunger for precise placement.

• 🟣 Anodized magenta body as shown in the photos.

Operation procedure (from the insert)

1. SET — Push the set knob to load the shaft until the knob stops.

2. MELT THE SOLDER — Heat the joint with a soldering iron.

3. REMOVE THE SOLDER — Aim the nozzle at the molten solder and press the release button to suck the solder.

Maintenance (from the insert)

1. Turn the cylinder counter-clockwise to remove it.

2. Clean the piston and the inner cylinder with a brush, then oil the piston ring.

3. Carefully re-assemble the plunger into the cylinder.

Specifications

What’s in the pack

• 1× GOLDTOOL GSR-315 desolder pump

• Retail card/blister with printed operation and maintenance panels