Description
Versatile Pneumatic Brad & Staple Nailer
The INGCO ACN50401 Air Nailer is a practical pneumatic fastening tool for finish and trim work. It supports both brad nails and crowned staples in a broad range of lengths, features a 100Pcs load capacity, and is specified to run at 0.4–0.7 MPa (60–100 Psi).
Key Benefits
1) Dual fastening capability
Accepts both brads (15–50mm) and staples (16–40mm), letting you switch between fastener types without changing tools.
2) Reduced reloads
A 100Pcs load capacity helps minimise interruptions for reloading during continuous tasks.
3) Works with pneumatic setups
Designed to operate at 0.4–0.7 MPa (60–100 Psi), matching typical pneumatic pressure ranges for finish nailers.
4) Defined staple profile
Staples use a 5.7mm crown to provide a consistent holding profile for crowned staples.
5) Retail-ready packaging
Supplied in a color box for straightforward retail presentation and storage.
Use Case Section
Common Applications
The INGCO ACN50401 Air Nailer is suitable for:
- Door and window trim installation
- Moulding and picture-frame finishing
- Cabinetry and fine woodworking
- Upholstery and fabric attachment
- Finish-stage furniture fastening
- Panel and trim fixing
These applications are suggested based on the tool’s support for brads and staples, its fastener length ranges, load capacity, and specified operating pressure.
Features Section
Key specifications at a glance.
- Model: ACN50401
- Product Type: Air Nailer
- Load Capacity: 100Pcs
- Brad Size Range: 15–50mm
- Staple Size Range: 16–40mm
- Staple Crown: 5.7mm
- Operation Pressure: 0.4–0.7 MPa (60–100 Psi)
- Packaging: color box
What’s in the Box
Inside the package, you get:
- 1 × INGCO ACN50401 Air Nailer
Technical Specifications
| Specification | Details |
|---|---|
| Model | ACN50401 |
| Product Type | Air Nailer |
| Load Capacity | 100Pcs |
| Brad Size | 15-50mm |
| Staple Size | 16-40mm |
| Staple Crown | 5.7mm |
| Operation Pressure | 0.4-0.7Mpa(60-100Psi) |
| Packaging | color box |
All specifications above are taken from the manufacturer product page.
The INGCO ACN50401 Air Nailer offers flexible finishing performance by supporting both brads and crowned staples across the specified length ranges; select the appropriate fastener length and operate the tool within the 0.4–0.7 MPa (60–100 Psi) pressure range.
Callout Blocks
Model
ACN50401
Load Capacity
100Pcs magazine
Operating Pressure
0.4–0.7 MPa (60–100 Psi)
FAQ
What brad sizes does this nailer accept?
It accepts brad nails in the range of 15–50mm.
What staple sizes and crown does it support?
Staple lengths supported are 16–40mm with a staple crown of 5.7mm.
How many fasteners does the magazine hold?
The load capacity is listed as 100Pcs.
What operating pressure is required?
The specified operation pressure is 0.4–0.7 MPa (60–100 Psi).
How is the product packaged?
The product is supplied in a color box.
Reviews
There are no reviews yet.