LP150-12 (12V150AH) battery made in Malaysia

Description

The LP150-12 (12V 150Ah) is a high-capacity, heavy-duty Sealed Lead-Acid (SLA) battery using AGM (Absorbent Glass Mat) technology. These batteries are primarily engineered for deep-cycle reliability in mission-critical backup systems, solar energy storage, and industrial power applications.

Technical Specifications

• Nominal Voltage: 12V

• Nominal Capacity: 150Ah (at the 20-hour rate)

• Technology: VRLA / AGM (Maintenance-free)

• Typical Dimensions: Approximately 483mm (L) x 170mm (W) x 240mm (H).

• Weight: Approximately 42kg – 48kg (heavy, requires careful handling).

• Terminal Type: Typically M8 bolt-down (Insert) terminals.

• Design Life: Often rated for 5–10 years in standby/float service.

Key Features

• High Energy Density: Designed to provide consistent, long-duration power output.

• Maintenance-Free: The sealed VRLA construction eliminates the need to add water.

• Safety: Features a one-way pressure-relief valve for gas recombination.

• Rugged Build: Housed in high-impact-resistant ABS plastic, designed to withstand vibration and mechanical stress.

• Versatile: Can be mounted in any orientation except upside down.

Typical Applications

• Solar/Renewable Energy Storage: Ideal for medium-scale off-grid power systems, providing reliable storage for solar panels.

• UPS Systems: Used for heavy-duty uninterruptible power supplies in server rooms, data centers, and industrial facilities.

• Telecommunications: Backup power for remote signal towers and critical network infrastructure.

• Industrial Power: Backup for automated control systems, emergency lighting, and large-scale alarm systems.

• Mobility: Frequently used in heavy-duty electric sweepers, scrubbers, or large-capacity mobility systems.

Critical Maintenance & Handling

Safety Warning: Due to the weight (40kg+), use proper lifting techniques or mechanical assistance when installing. Ensure your mounting surface (rack or floor) is rated for this weight.

• Charging: Use a smart charger compatible with AGM/SLA batteries.

  • Standby/Float Voltage: 13.5V – 13.8V.

  • Cycle Use Voltage: 14.4V – 14.9V.

• Avoid Deep Discharge: Frequent discharge below 10.5V will significantly reduce the battery’s lifespan. If using for solar, ensure your charge controller is set to cut off before this limit.

• Storage: If the battery must be stored, ensure it is fully charged and store it in a cool, dry place. Perform a “freshening charge” every 3 months to prevent internal sulfation.

• Terminal Care: Use a proper socket wrench to tighten M8 bolts. Loose connections will cause significant heat generation under load, which can damage the battery terminals and casing.