Description
The 8.2V 0.5W Zener diode is a precision voltage regulator component. By industry standards, this is most commonly represented by the 1N5237 or the BZX79-C8V2. It is specifically designed to maintain a stable 8.2V reference in signal-level or low-power control circuits.
Technical Specifications
| Parameter | Specification |
| Nominal Zener Voltage ($V_Z$) | 8.2V |
| Power Dissipation ($P_D$) | 0.5W (500mW) |
| Package Type | DO-35 (Small Glass Axial) |
| Tolerance | $\pm 5\%$ |
| Operating Temperature | -65°C to +200°C |
Understanding the Zener Principle
The primary function of this diode is to operate in the reverse breakdown region. Once the applied voltage hits 8.2V, the diode begins to conduct, effectively “clamping” the voltage at that level to protect your circuit from overvoltage.
To function as a regulator, you must use a series current-limiting resistor ($R_s$). Without this resistor, the diode would draw excessive current, exceed its 0.5W power rating, and fail—usually by short-circuiting.
Application & Replacement Notes
-
Thermal Management: Because this is a 500mW device, you must ensure the current ($I_Z$) flowing through the diode is kept within safe bounds. Using the formula $P_D = V_Z \times I_Z$, your maximum current should stay well below ~60mA ($0.5W / 8.2V$).
-
Replacement: When sourcing a replacement, look for the 1N5237. Ensure it is a 0.5W version in the DO-35 package to ensure it physically fits your PCB layout.
-
Diagnostics: If you are troubleshooting a circuit, a failed Zener will typically measure a low-resistance short in both directions.
Reviews
There are no reviews yet.