Description
UNI-T UTD2202CEX+ Digital Storage Oscilloscope 200MHz 2 Channel
From the first glance, the UTD2202CEX+ has a purposeful presence on the bench. Its seven-inch display anchors the front, surrounded by well-laid controls that invite experimentation. Holding it, you sense that it’s designed as a serious tool not merely a gadget. The knobs, buttons, and interface seem balanced between precision and accessibility, suggesting that it’s built for repeated use rather than occasional testing.
As you power it on and channel in your first signal, the oscilloscope responds with confidence. Waveforms appear with clarity, offering both overview and zoomed detail. Changing time bases or probing alternate channels feels fluid, and the transitions between views are intuitive. Because it supports auto mode and a well-designed trigger system, you’re not constantly fighting for display stability instead, you feel in control of what the scope reveals. Watching the trace move, split, or overlay gives a sense of “seeing inside” electronic systems.
Over repeated sessions, the UTD2202CEX+ becomes less of a tool and more of a partner. It doesn’t draw attention to itself it just works. Whether diagnosing circuits, probing signal integrity, or verifying timing, it quietly supports you. You get comfortable with its workflows, trusting its memory, trigger modes, and measurement readouts. In short: it’s a versatile, dependable scope that bridges the gap between bench instruments and everyday troubleshooting.
Features:
- 200MHz bandwidth
- 2channels, low noise floor, wide vertical range: 1mV/div~20V/div
- Memory depth: 64kpts
- System software upgrade via USB drive
- 7 inch TFT LCD
- Supports plug-and-play USB storage device; communication with and remote control of the computer through the USB device
Specifications:
| Key Specifications | UTD2202CEX+ |
| Bandwidth | 200MHz |
| Channels | 2 |
| Sampling rate | 1GSa/s |
| Memory depth | 64kpts |
| Waveform capture rate | 5, 000wfms/s |
| Rise time | <1.8ns |
| Vertical scale (V/div) | 1mV/div~20V/div |
| Vertical resolution | 8bit |
| Time base scale (s/div) | 2ns/div~50s/div |
| Deviation from scope | ±8div(away from screen center) |
| Input impedance | 1MΩ±2% ,18±3pF |
| Input coupling | DC, AC, GND |
| Timing accuracy | ≤± (50+2 × service life )ppm
、 、 |
| Time base mode | Y-T X-Y Roll |
| Storage methods | Setup, wave, bitmap |
| Trigger types | Edge, pulse, alternate, slope, video
＋ － |
| Mathematical operations | , , ×, ÷, FFT |
| Auto measurements | Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, C ycRMS, Period, Freq, Rise, Fall, RiseDelay,
FallDelay, +Width, -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in total |
| Displayed measurements | Display 5 measurements at the same time |
| Frequency counter | 6 bits |
| Interface | USB Host, USB Device, Pass/Fail |
| Power | 100-240VAC, 45-440Hz |
| Display | 7-inch TFT LCD, 800×480 |
| Product Color | White and grey |
| Product net weight | 2.5kg |
| Product size (W×H×D) | 306mm×138mm×124mm |
Applications:
- Circuit debugging & signal analysis.
- Embedded system / microcontroller diagnostics.
- Power electronics testing.
- Communications / RF signal inspection.
- Educational / teaching labs.
- Research & development measurement.
- On-site service & maintenance troubleshooting.
Package Contents:
- 1x UTD2202CEX+ oscilloscope unit
- 1x Power cord (AC mains cable)
- 1x USB 2.0 printing / data cable
- 2x Passive probes UT-P05 (10×/1× switchable, 200 MHz)
- 1x English download guide / user manual
- 1x Multi-language safety manual & calibration report (COC)
Reviews
There are no reviews yet.